法国polymetron配件
|
Z545=001=004 |
Key for cabinet 9097/9073 |
Z578=301=038 |
Wall through gland for 6mm external diameter tubing |
Z578=401=501 |
Stopper (red) for quick fitting , ø 6mm |
Z578=507=602 |
Set of tools for disconnecting in and out sampling tubes of 9126 PURECAL and tubings on 924x quick fittings |
Z578=601=703 |
Quick fitting for 6mm extrenal diameter tubing |
Z578=602=703 |
Quick fitting for ø 8mm O.D. tubing |
Z578=603=703 |
Quick fitting for 10mm external diameter tubing |
Z579=034=000 |
3/4" Elbow adaptor in s.steel |
Z581=000=510 |
2" clamp for 8398,2 |
Z581=100=510 |
316LSS welding ferrule for 8398,2 |
Z581=200=500 |
316L SS welding ferrule for 8398,3 |
Z583=012=012 |
Barbed fitting NPT ½" for tubing ½" |
Z584=024=024 |
union fitting PP for 4mm tubing |
Z587=004=002 |
Adaptor 1/4"’G / DN8 |
Z587=006=002 |
Straight fitting, G1/4" thread - 4/6mm tubing, in PP |
Z587=006=012 |
Fitting PP ¼‘’NPT DN4x6mm |
Z587=106=002 |
1/4 DN 4/6 elbow fitting |
Z587=106=012 |
Elbow fitting PP ¼’’NPT DN4x6mm |
Z587=108=002 |
Elbow barbed nipple DN 6 G1/4'' in PP |
Z587=108=012 |
Fitting Elbow 1/4"NPT - 6/8mm Tubing, PP |
Z587=112=003 |
3/8 DN 10/12 elbow fitting |
Z587=114=003 |
Elbow barbed nipple DN 12 G3/8'' in PP |
Z587=306=001 |
TE fitting G1/4" DN 4/6 (x2) in PP |
Z587=906=002 |
Fitting 90° long neck, G1/4" thread - 4/6mm tubing, in PP |
Z588=003=046 |
wall-through fittings PPH DN4/6 |
Z588=003=068 |
wall-through fittings PPH DN6/8 |
Z588=004=160 |
Non rotating panel mount connector DN 1.6 |
Z588=004=163 |
Bulkhead fitting for 1.6 x 3.2 tubing through AutoCal lead's bottle |
Z588=004=254 |
Panel mount fitting DN 2.5 / 4 in PP |
Z589=010=015 |
Fitting for 1.7mm I.D tubing – 10/32’’ thread |
Z589=010=016 |
1/16 T junction 10-32 polypropylène |
Z589=010=141 |
Calibration solution injection T |
Z589=011=016 |
Straight nipple NPT 1/8 inch in PP |
Z589=011=040 |
Fitting for 4mm I.D tubing – 10/32’’UNF thread in PP |
Z589=012=040 |
Elbow nipple for 8810 dilution system |
Z590=011=130 |
Set of 12 tubes grey-grey black viton |
Z590=015=150 |
TUBE BLACK VITON 1.5/3 mm (per meter) Minimum order of 3 meters |
Z590=020=038 |
Orange/Green ismaprene tube, one piece - "Extended lead-time may occur on this spare-part because the analyser itself was obsolete more than 5 years ago" |
Z590=020=130 |
Grey/grey ismaprene tube, one piece |
Z590=020=165 |
Blue/blue ismaprene tube, one piece |
Z590=020=185 |
Green/green ismaprene tube, one piece |
Z590=020=206 |
Peristaltic pump tube Ismaprene with 3 color coded stopper purple / purple |
Z590=050=060 |
Tubing in PE (low density), ø 1.6x3.2mm (per meter) |
Z590=060=026 |
Tubing in PTFE , ø 2x6 mm (per meter) |
Z590=060=080 |
PTFE tubing 6/8 mm per meter |
Z590=121=810 |
Tubing, Polyethylene 8 x 10 mm (per meter) |
Z590=160=030 |
Tubing 1.6x3.2mm made of Silicone per meter |
Z590=160=040 |
Silicone tubing 2/4mm per meter |
Z590=160=080 |
Silicone tubing ø 6x8 mm (per meter) |
Z590=200=046 |
Transparent flexible PVC tubing sized 4x6mm (per m) |
Z590=200=260 |
Transparent PVC tubing 20x26mm (per m) |
Z590=514=200 |
Set of 5 peristaltic pump tubing |
Z590=620=025 |
Orange/blue Ismaprene tubes for kit-K, set of 6 pcs |
Z595=000=001 |
Dechlorination cartridge for 8810 METHANOL |
Z595=000=002 |
In-Line filter for tubing 4mm I.D; body made of PP |
Z595=006=000 |
Filter(60µ) for water - High performance (8bars - 40°C) and transparent cartridge holder (made of microcrystallin PP) - Inlet&Oulet quick-connectors (6mmOD) - H(85)Diam.(56) - Dismountable - See filtration cartridge packages at 595=006=9xx |
Z595=006=005 |
Filter(60µ) for water, imperial - High performance (8bars - 40°C) and transparent cartridge holder (made of microcrystallin PP) - Inlet&Oulet quick-connectors (1/4'' OD) - H(85)Diam.(56) - Dismountable - - See filtration cartridge packages at 595=006=9xx |
Z595=006=906 |
Filtration cartridge(60µ) pack (6 per pack) for filter 595=006=0xx |
Z595=010=000 |
Filter(100µ) for water - High performance (8bars - 40°C) and transparent cartridge holder (made of microcrystallin PP) - Inlet&Oulet quick-connectors (6mmOD) - H(85)Diam.(56) - Dismountable - See filtration cartridge packages at 595=010=9xx |
Z595=010=005 |
Filter(100µ) for water, imperial - High performance (8bars - 40°C) and transparent cartridge holder (made of microcrystallin PP) - Inlet&Oulet quick-connectors (1/4'' OD) - H(85)Diam.(56) - Dismountable - See filtration cartridge packages at 595=010=9xx |
Z595=010=906 |
Filtration cartridge(100µ) pack (6 per pack) for filter 595=010=0xx |
Z596=118=024 |
Membrane (spare part) in EPDM (no coating) for sampling electrovalve P/N 689=118=024 |
Z6001-2400-33 |
RD-240 immersion sensor |
Z6001-2420-00 |
RD-242 insertion sensor |
Z6001-2620-00 |
RD-262 insertion sensor |
Z6010-2000-33 |
Interconnect cable for WP242/262 and RD242/262, 33ft with connector. |
Z6020-0000 |
Handrail mounting bracket kit (2) |
Z6021-0020 |
Ball valve for RD 242/262 insertion sensors |
Z6022-0016 |
Wiper assy kit, WP sensors (4 ea) |
Z6071-2500 |
Tx-pro2 / RD user manual, English |
Z6071-2510 |
Tx-pro2 / RD user manual, French |
Z6071-2520 |
Tx-pro2 / RD user manual, German |
Z6071-2530 |
Tx-pro2 / RD user manual, Italian |
Z6071-2540 |
Tx-pro2 / RD user manual, Spanish |
Z6101-2400 |
TxPro-2/RD-240 (1 immersion sensor) including 10 meter (33 ft.) cable |
Z6101-2420 |
TxPro-2/RD242 (1 insertion sensor) including one 10 meter (33 ft.) interconnect cable and one ball valve |
Z6101-2600 |
TxPro-2/RD-260 (1 immersion sensor) including one 10 meter (33 ft.) cable |
Z6101-2620 |
TxPro-2/RD-262 (1 insertion sensor), one 10 meter (33 ft.) cable and a ball valve |
Z6201-2400 |
TxPro-2/RD-240 (2 immersion sensors) including 10 meter (33 ft.) cable per sensor |
Z6201-2420 |
TxPro-2/RD-242 (2 insertion sensors) including two 10 meter (33 ft.) interconnect cables and two ball valves |
Z6201-2600 |
TxPro-2/RD-260 (2 immersion sensors) including 10 meter (33 ft.) cable per sensor |
Z6201-2620 |
TxPro-2/RD-262 (2 insertion sensors) including two 10 meter (33 ft.) interconnect cables and two ball valves |
Z621=083=061 |
Instruction manual in French for 8361 pH probe |
Z621=088=110 |
Instruction manual in French 8810.1 pH |
Z621=088=111 |
Instruction manual in French 8811 |
Z621=088=210 |
Instruction manual in French 8810.2 ORP |
Z621=088=310 |
Instruction manual in French 8810.3 ISE |
Z621=088=410 |
8810 METHANOL Instruction manual in French |
Z621=088=510 |
8810 PO4 colorimetric instruction manual in French |
Z621=089=020 |
Instruction manual in French 8920 |
Z621=089=021 |
Instruction manual in French 8921 |
Z621=089=064 |
Instruction manual in French 8964 |
Z621=089=065 |
Instruction manual French for pH transmitters 8965, 8965Ex |
Z621=089=130 |
Instruction manual in French for pH transmitter 8930 |
Z621=089=206 |
technical note for special firmware version 8920 Cond V6.XX in French |
Z621=089=207 |
Technical note for special firmware version 8920 Cond V7.XX in English |
Z621=089=209 |
Technical note for special firmware version 8920 V9.XX in French |
Z621=089=214 |
Technical note for special firmware version 8921 V4.XX in French |
Z621=089=217 |
Technical note for special firmware version 8920 Cond V7.XX data com. in french |
Z621=089=303 |
Technical note for special firmware version in french for pH transmitter 8930 V3.XX |
Z621=090=073 |
Instruction manual French for 9073 |
Z621=090=078 |
Instruction manual in French 9078 |
Z621=090=173 |
Instruction manual in French for 9073 EDF |
Z621=183=061 |
Instruction manual in english for 8361 pH probe |
Z621=188=110 |
Instruction manual in English 8810.1 pH |
Z621=188=111 |
Instruction manual in English 8811 |
Z621=188=210 |
Instruction manual in English 8810.2 ORP |
Z621=188=310 |
Instruction manual in English 8810.3 ISE |
Z621=188=410 |
8810 METHANOL Instruction manual in English |
Z621=188=510 |
8810 PO4 colorimetric instruction manual in English |
Z621=189=020 |
Instruction manual in English 8920 |
Z621=189=021 |
Instruction manual in English 8921 |
Z621=189=064 |
Instruction manual in English 8964 |
Z621=189=065 |
Instruction manual English for pH transmitters 8965, 8965Ex |
Z621=189=130 |
Instruction manual in English for pH transmitter 8930 |
Z621=189=206 |
Technical note for special firmware version 8920 Cond V6.XX in English |
Z621=189=207 |
Technical note for special firmware version 8920 Cond V7.XX in French |
Z621=189=209 |
Technical note for special firmware version 8920 Cond V9.XX in English |
Z621=189=214 |
Technical note for special firmware version 8921 V4.XX in English |
Z621=189=217 |
Technical note for special firmware version 8920 V7.XX data com. in english |
Z621=189=303 |
Technical note for special firmware version in English for ph transmitter 8930 V3.XX |
Z621=190=073 |
Instruction manual in English 9073 |
Z621=190=078 |
Instruction manual in English 9078 |
Z621=190=097 |
Instruction manual in English for 9097 |
Z621=288=111 |
Instr. manual in German 8811 |
Z621=288=310 |
8810 ISE Instruction manual in German |
Z621=289=020 |
Instruction manual in German 8920 |
Z621=289=021 |
Instruction manual in German 8921 |
Z621=289=064 |
Instruction manual in German for 8964 |
Z621=289=065 |
Instruction manual German for pH transmitters 8965, 8965Ex |
Z621=289=130 |
Instruction manual in German fro pH transmitter 8930 |
Z621=290=073 |
Instruction manual in German for 9073 |
Z621=290=078 |
Instruction manual in German for 9078 |
Z621=383=040 |
Instruction manual in French/English/German for 8340 |
Z621=383=044 |
Instruction manual in French/English/German for 8344 |
Z621=383=046 |
Instruction manual in French/English/German for 8346/8347 |
Z621=389=021 |
Instruction manual in French and English for 8921 CONCENTRATION |
Z621=389=221 |
Instruction manual in German 8921conc |
Z621=489=065 |
Instruction manual Italien for pH transmitters 8965, 8965Ex |
Z621=490=073 |
Instruction manual in Italian for 9073 |
Z621=490=078 |
Instruction manual in Italian for 9078 |
Z621=997=001 |
Installation procedure 8810 in French Ammonia 0-100 mg/l N NH4 |
Z621=997=002 |
Installation procedure 8810 in French Ammonia 0-1 mg/l N NH4 |
Z621=997=003 |
Installation procedure 8810 in French Cyanide 0-1 mg/l CN- |
Z621=997=004 |
Installation procedure 8810 in French Fluoride 0-1000 mg/l F- |
Z621=997=005 |
Installation procedure 8810 in French Nitrate 1-100 mg/l NO3 |
Z621=997=006 |
Installation procedure 8810 in French Calcium 0-500 mg/l CaCO3 |
Z621=997=007 |
Install.procedure 8810 in French Total hardness 0-10 mg/l CaCO3 |
Z621=997=008 |
Install.procedure 8810 in French m and p values 0-500 mg/l CaCO3 |
Z621=997=009 |
Install.procedure 8810 in French Free/total acidity,phosphatizing |
Z621=997=011 |
Installation procedure 8810 in French Accelerator (phosphatizing) |
Z621=997=013 |
Install.procedure 8810 in French Total hardness 0-500 mg/l CaCO3 |
Z621=997=016 |
Install.procedure 8810 in French Chloride O,5-500 mg/l Cl- |
Z621=997=017 |
Installation procedure 8810 in French Sulphide 1-100 mg/l S- - |
Z621=997=019 |
Installation procedure 8810 in French Zinc phosphatizing |
Z621=997=020 |
Installation procedure 8810 in French Chromium VI phosphatizing |
Z621=997=021 |
Installation procedure 8810 in French Sodium hydroxide 0-50 g/l |
Z621=997=022 |
Installation procedure 8810 in French Free hydrosulfite/indigo |
Z621=997=024 |
Install.proced.8810 in French Chlorine high concent.0-3 g/l Cl2 |
Z621=997=025 |
Install. proced. 8810 in French Sulphide 0-1 mg/l S- |
Z621=997=028 |
Install.proced.8810 in French Hydrogen peroxyde 0-20 g/l H2O2 |
Z621=997=029 |
Install.procedure 8810 in French Phosphates 5-100 mg/l P-PO4 |
Z621=997=030 |
Installation procedure PO4 colorimetric in French |
Z621=997=031 |
Installation procedure 8810 Phosphates 0-5 mg/l P-PO4 |
Z621=997=101 |
Installation procedure 8810 in English Ammonia 0-100 mg/l N NH4 |
Z621=997=102 |
Installation procedure 8810 in English Ammonia 0-1 mg/l N NH4 |
Z621=997=103 |
Installation procedure 8810 in English Cyanide 0-1 mg/l CN- |
Z621=997=104 |
Installation procedure 8810 in English Fluoride 0-1000 mg/l F- |
Z621=997=105 |
Installation procedure 8810 in English Nitrate 1-100 mg/l NO3 |
Z621=997=106 |
Installation procedure 8810 in English Calcium 0-500 mg/l CaCO3 |
Z621=997=107 |
Install.procedure 8810 in English Total harness 0-10 mg/l CaCO3 |
Z621=997=108 |
Install.procedure 8810 in English m and p values 0-500 mg/l CaCO3 |
Z621=997=109 |
Instal.procedure 8810 in English Free/total acidity,phosphatizing |
Z621=997=111 |
Install.procedure 8810 in English Accelerator (phosphatizing) |
Z621=997=113 |
Install.procedure 8810 in English Total hardness 0-500 mg/l CaCO3 |
Z621=997=116 |
Install. procedure 8810 in English Chloride 0,5-500 mg/l Cl- |
Z621=997=117 |
Installation procedure 8810 in English Sulphide 1-100 mg/l S- - |
Z621=997=119 |
Installation procedure 8810 in English Zinc phosphatizing |
Z621=997=120 |
Installation procedure 8810 in English Chromium VI phosphatizing |
Z621=997=121 |
Installation procedure 8810 in English Sodium hydroxide 0-50 g/l |
Z621=997=122 |
Installation procedure 8810 in English Free hydrosulfite/indigo |
Z621=997=124 |
Install.proced.8810 in English Chlorine high concent. 0-3 g/l Cl2 |
Z621=997=125 |
Install. proced. 8810 in English Sulphide 0-1 mg/l S- |
Z621=997=128 |
Install.proced.8810 in English Hydrogen peroxide 0-20 g/l H202 |
Z621=997=129 |
Install. procedure 8810 in English Phosphates 5-100 mg/l P-PO4 |
Z621=997=130 |
Installation procedure PO4 colorimetric in English |
Z621=997=131 |
Installation procedure 8810 Phosphates 0-5 mg/l P-PO4 |
Z621=997=201 |
Installation procedure 8810 in German Ammonia 0-100 mg/l N NH4 |
Z621=997=205 |
Installation procedure 8810 in German Nitrate 1-100 mg/l NO3 |
Z621=997=229 |
Installation procedure 8810 Orthophosphat 5-100 mg/l P-PO4 |
Z621=997=231 |
Installation procedure 8810 Orthophosphat 0-5 mg/l P-PO4 |
Z689=111=041 |
2/2 way solenoid valve (vessel to photometer) |
Z689=112=031 |
2/2 way solenoid valve inox (24 V rinse water) |
Z689=118=008 |
Solenoid valve (24CC, 2/2way) as per 9210&9211 sample blocks [NPS 0.8 (0.2 - 6 bars)] - Delivered with one connector P/N 350=005=377 - For mounting, see special torx screw driver at P/N 820=000=006 |
Z689=118=016 |
Solenoid valve (24CC, 2/2way, NPS 1.6 (0.2 - 2 bars)) - Delivered with one connector P/N 350=005=377 - For mounting, see special torx screw driver at P/N 820=000=006 |
Z689=118=024 |
Solenoid valve (24CC, 2/2way) as per 9210&9211 overflow vessel (AKA transfer valve) - For connector, see P/N 350=005=377 - For mounting, see special torx screw driver at P/N 820=000=006 |
Z689=131=020 |
Electro-valve for mixed bed |
Z689=131=030 |
3/2 way valve |
Z689=132=008 |
Solenoid valve (24CC, 3/2way) as per 9245&9240 sample blocks [NPS 0.8 (0.2 - 6 bars)] - For connector , see P/N 09240=A=9172 - For mounting, see special torx screw driver at P/N 820=000=006 |
Z689=132=024 |
Solenoid valve (24CC, 3/2way) as per 9245&9240 over-flow-vessel (AKA conditioning valve) - For connector, see P/N 09240=A=9171 - For mounting, special torx screw driver at P/N 820=000=006 - |
Z694=000=001 |
9186 flowmeter 0-16l/h with adjustment valve |
Z694=000=002 |
Flowmeter without connection adapters |
Z695=004=003 |
Volumetric pump for 8810 |
Z695=004=004 |
Pump 24VDC, membrane, 0.1L/mn, for 921x-calibration/flush pump , for 924x-flush pumpCalibration / flush pump |
Z695=004=006 |
Gas-pump 80V , (highly resistant to aggressive vapor of DIPA) |
Z695=114=000 |
Micro-pulses pump for Auto-calibration |
Z695=114=005 |
Micro-pulses pump for regeneration |
Z696=038=112 |
NO 2/2 way solenoid valve (sample) |
Z696=046=001 |
Needle valve |
Z696=146=001 |
Flow adjustment valve |
Z697=000=001 |
Stop valve for pH/ORP autocal pump |
Z810=001=029 |
Zinc (1 Kg) for 8893 |
Z820=000=006 |
Elbow torx screw driver T6 |